Tellisesiler SILER TT

TELLISESILER SILER TT
POLYMERIC PLASTER FOR LEVELLING WALLS

Very plastic, easy to tool, with a long tooling period, polymeric plaster mix for levelling walls.

Colour: light grey. Used for levelling interior and exterior walls. Can be applied by hand using a steel float. The layer thickness when covering large areas is usually 2-7 mm. The first coat has to be left to dry for 24 hours before applying the second coat.  After the final setting, the mix is heat- and cold-resistant.

Composition: polymers, plasticizers, hydrated lime, cement, lightweight aggregate.
Grain size >0.63mm.
Package: 25 kg

Additional Files

Category:

Description

TELLISESILER SILER TT
PLASTER COMPOUND FOR DRY, DAMP CONDITIONS

Plastic, easy-to-use, polymeric smooth wall stucco with delayed setting time.

COMPOSITION
Fine sand, limestone powder (max. grain  0.63 mm), cement, lime, polymers, plasticizers.

APPLICATIONS
Smoothing and stuccoing of mineral masonry.
Plastering of firewalls and chimneys.
Reconditioning of old plasterwork.

SURFACE
Suitable for bricks, exclay blocs, lightweight concrete, concrete, plaster and various damp-proof surfaces.
Surface must be solid, free of impurities, dust and other substances which would affect a bond of stucco, like loose paint, grease, and old non-waterproof smoothing coatings.

PREPARATION FOR USE
Pour necessary amount of powder into suitable mixing container.
Add water in amount 15-16% of powder weight
(3,75 – 4 litres for 25 kg bag).
Stir mechanically or manually until compound is homogenous.
Leave compound for a while and stir again.
Use prepared plaster during 4 hours.

PLASTERING
Work with steel float, length 60-80 cm.
It is recommended to moisturise extremely dry and porous surfaces before plastering.
If working manually put plaster on steel float and apply to the wall.
Compound can be applied mechanically with plaster pump in an even layer and levelled then with steel float.
Layer thickness for normal overall stuccoing is 2-7 mm. Reconditioning plaster layer thickness up to 30 mm.

CURING
Curing time of one layer is about one day in medium conditions.
Before applying next layer the previous one must be cured.
It is recommended to moisturise surfaces after plastering in extremely dry conditions.
Cured surfaces can be smoothed with filler and painted.

LIMITATIONS
Do not apply when surface, plaster, and ambient temperature is less than + 5 °C.
Not suitable for non-waterproof, loose surfaces and painted finish.
Not suitable for floors.

STORAGE
Packed powder should be stored in dry conditions.
Storage time 1 year.

PLASTER CONSUMPTION
Consumption for overall plastering at 1 mm thickness is 1.2-1.3 kg per m2 on average.
 

Related products