Plock adhesive

PLOKILIIM
PLOCK ADHESIVE

for laying and bonding light concrete blocks
Used in interior and exterior environment.
 

Category:

Description

PLOKILIIM
PLOCK ADHESIVE

For laying and bonding light concrete blocks

Used indoors and outdoors.

USED
For laying and bonding ROCLITE, BAUROCK and other similar blocks of light concrete.

PREPARATIONS
Pour necessary amount of powder into mixer.
Add water 20-22% of the mix weight (5-5.5 litres per 25 kg).
Stir mechanically or manually until completely wet.
Prepared mix is usable for 4 hours.

APPLYING
The best way to apply the adhesive to blocks is to use special mix spreading equipment.
Block adhesive can successfully be applied also with a toothed trowel or steel float.

RESTRICTIONS
Adding water to the mix that has started hardening in the mixer does not restore initial qualities of the mix.
In case of contact with eyes or mucous membrane wash with plenty of clean water.

STORING
Bagged mix is to be stored in dry conditions.
Storage time of mix powder in dry conditions is one year.

CONSUMPTION
Depends on the width of blocks and the layer thickness.